Errata - English

In footnote 2: Change
9-{(E)-4-[(2R,3aS,6S,7S,8aRS)-2-{(1RS,2S,3S)-1,3-Dihydroxy-2-methylbutyl}-7-hydroxyhexahydro-2H-furo[3,2-c]pyran-6-yl]-3-methylbut-2-enoyloxy}nonanoic acid.
to:
9-{(E)-4-[(2R,3aS,6S,7S)-2-{(1RS,2S,3S)-1,3-Dihydroxy-2-methylbutyl}-7-hydroxyhexahydro-2H-furo[3,2-c]pyran-6-yl]-3-methylbut-2-enoyloxy}nonanoic acid.

Change
847.00
to:
847.02
AND
Change
(9S,12E,14S,15R,16S,17R,18R,19R,20S,21S,22E,24Z)-6,16,18,20-Tetrahydroxy-1′-isobutyl-14-methoxy-7,9,15,17,19,21,25-heptamethylspiro[9,4-(epoxypentadeca[1,11,13]trienimino)-2H-furo[2′,3′:7,8]naphth[1,2-d]imidazole-2,4′-piperidine]-5,10,26-(3H,9H)-trione-16-acetate
to:
(9S,12E,14S,15R,16S,17R,18R,19R,20S,21S,22E,24Z)-6,18,20-Trihydroxy-1’-isobutyl-14-methoxy-7,9,15,17,19,21,25-heptamethyl-5,10,26-trioxo-3,5,9,10-tetrahydrospiro[9,4-(epoxypentadeca[1,11,13]trienimino)-2H-furo[2’,3’:7,8]naphtho[1,2-d]imidazole-2,4’-piperidin]-16-yl acetate

Change
523.32
to:
523.33
AND
Change
(3R)-3-Amino-1-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazin-7(8H)-yl-4-(2,4,5-trifluorophenyl)butan-1-one phosphate monohydrate
to:
(3R)-3-Amino-1-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazin-7(8H)-yl]-4-(2,4,5-trifluorophenyl)butan-1-one phosphate monohydrate

In Test 2/Analysis: Change
C_S = concentration of USP Prazosin Hydrochloride RS in the Standard solution (µg/mL)
to:
C_S = concentration of USP Prazosin Hydrochloride RS in the Standard solution (mg/mL)
AND
Change
M_r2 = molecular weight of prazosin hydrochloride, 419.86
to:
M_r2 = molecular weight of prazosin hydrochloride, 419.87

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In Analysis: Change
Results = (A_U/A_S) × C_S × D × (1/L) × V × 100
A_U = absorbance of the Sample solution
A_S = absorbance of the Standard solution
C_S = concentration of USP Prochlorperazine Maleate RS in the Standard solution
D = dilution factor for Sample solution, if needed
L = label claim (mg/Tablet)
V = volume of Medium, 500 mL
to:
Result = (A_U/A_S) × C_S × V × D × (M_r1/M_r2) × (1/L) × 100
A_U = absorbance of the Sample solution
A_S = absorbance of the Standard solution
C_S = concentration of USP Prochlorperazine Maleate RS in the Standard solution
V = volume of Medium, 500 mL
D = dilution factor for the Sample solution, if needed
M_r1 = molecular weight of prochlorperazine, 373.94
M_r2 = molecular weight of prochlorperazine maleate, 606.09
L = label claim (mg/Tablet)

In Leachable Arsenic/Analysis: Change
A 3.0-mL portion of the Sample solution meets the requirements in Arsenic 〈211〉, Procedures, Procedure.
to:
A 3.0-mL portion of the Sample solution meets the requirements in Arsenic 〈211〉, Procedures, Procedure 1.

In Acetic Acid in Peptides/Analysis: Change
C_SPA = concentration of potassium acetate in each of the Standard solutions (mg/mL)
to:
C_SPA = concentration of potassium acetate in each of the Standard solutions (µg/mL)
AND
In Ammonium/Analysis: Change
C_SAC = concentration of ammonium chloride in each of the Standard solutions (mg/mL)
to:
C_SAC = concentration of ammonium chloride in each of the Standard solutions (µg/mL)

Change
Uniformity of Dosage Units 〈905〉
Procedure for content uniformity
to:
Uniformity of Dosage Units 〈905〉: Meets the requirements
Procedure for content uniformity, chewable tablets only
AND
In Uniformity of Dosage Units: Delete
Acceptance criteria: Meet the requirements for chewable tablets

In Dissolution 〈711〉/Test 1/Analysis: Change
Determine the percentage of telmisartan (C₃₃H₃₀N₄O₂) dissolved:
Result = (A_U × C_S × V × 100)/(A_S × D × L)
to:
Calculate the percentage of the labeled amount of telmisartan (C₃₃H₃₀N₄O₂) dissolved:
Result = (A_U/A_S) × C_S × V × D × (1/L) × 100
AND
Change
C_S = concentration of the Standard solution (mg/mL)
to:
C_S = concentration of USP Telmisartan RS in the Standard solution (mg/mL)
AND
In Dissolution 〈711〉/Test 2/Analysis: Change
r_U = peak response from the Sample solution
r_S = peak response from the Standard solution
to:
r_U = peak response of telmisartan from the Sample solution
r_S = peak response of telmisartan from the Standard solution
AND
In Dissolution 〈711〉/Test 3/Analysis: Change
C_S = concentration of the Standard solution (mg/mL)
to:
C_S = concentration of USP Telmisartan RS in the Standard solution (mg/mL)

In footnote 2: Change
9-{(E)-4-[(2R,3aS,6S,7S,8aRS)-2-{(1RS,2S,3S)-1,3-Dihydroxy-2-methylbutyl}-7-hydroxyhexahydro-2H-furo[3,2-c]pyran-6-yl]-3-methylbut-2-enoyloxy}nonanoic acid.
to:
9-{(E)-4-[(2R,3aS,6S,7S)-2-{(1RS,2S,3S)-1,3-Dihydroxy-2-methylbutyl}-7-hydroxyhexahydro-2H-furo[3,2-c]pyran-6-yl]-3-methylbut-2-enoyloxy}nonanoic acid.

In Dissolution 〈711〉/Medium: Change
26.7 g/L of sodium acetate trihydrate in water. Add 133 mL of glacial acetic acid to this solution, and then dilute with water to 10 L; 900 mL.
to:
0.02 M sodium acetate buffer, pH 3.5, prepared as follows. Dissolve 2.67 g of sodium acetate in 100 mL of water. Add 13.3 mL of glacial acetic acid and then dilute with water to 1000 mL; 900 mL.

In USP Reference Standards 〈11〉: Change
USP Rivastigmine Tartrate R-Isomer RS
to:
USP Rivastigmine Tartrate R-Isomer RS
(R)-3-[1-(Dimethylamino)ethyl]phenyl ethylmethylcarbamate, hydrogen tartrate.
C₁₄H₂₂N₂O₂ · C₄H₆O₆ 400.42

In System suitability: Change
[Note—The approximate relative retention times for (3S,3′S)-zeaxanthin, (3R,3′S-meso)-zeaxanthin, (3R,3′R)-zeaxanthin, and (3R,3′R,6′R)-lutein are 0.94, 1.00, 1.06, and 1.11, respectively.]
to:
[Note—The approximate relative retention times for (3S,3′S)-zeaxanthin, (3R,3′S)-zeaxanthin, (3R,3′R)-zeaxanthin, and (3R,3′R,6′R)-lutein are 0.94, 1.00, 1.06, and 1.11, respectively.]
AND
In System suitability/Suitability requirements/Resolution: Change
(3R,3′S-meso)-zeaxanthin
to:
(3R,3′S)-zeaxanthin
AND
In Analysis: Change
(3R,3′S-meso)-zeaxanthin
to:
(3R,3′S)-zeaxanthin
AND
In Acceptance criteria: Change
(3R,3′S-meso)-Zeaxanthin
to:
(3R,3′S)-Zeaxanthin

In Analysis: Change
M_r1 = molecular weight of atorvastatin, 558.64
M_r2 = molecular weight of atorvastatin calcium, 1155.34
to:
M_r1 = molecular weight of atorvastatin, 558.65
M_r2 = molecular weight of atorvastatin calcium, 1155.36

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In Limit of Naloxone Related Compound D: Delete
Sensitivity solution: 1.25 µg/mL of USP Naloxone Related Compound D RS in 0.1 N hydrochloric acid
AND
In System suitability/Samples: Delete
Sensitivity solution,
AND
In System suitability/Suitability requirements: Delete
Signal-to-noise ratio: NLT 10, Sensitivity solution

In Analysis: Change
Result = (r_U/r_S) × C_S × (1/F)
to:
Result = (r_U/r_S) × C_F × (1/F)
AND
Change
C_S = final concentration of USP Isoflurane Related Compound B RS in the Standard solution (%)
to:
C_F = final concentration of USP Isoflurane Related Compound B RS in the Standard solution (%)

In Dissolution 〈711〉/Test 8/Tolerances: Change
The percentage of the labeled amount of valproic acid (C₈H₁₆O₂) dissolved at the times specified conform to Dissolution <711>, Acceptance Table 1.
to:
The percentage of the labeled amount of valproic acid (C₈H₁₆O₂) dissolved at the times specified conform to Dissolution <711>, Acceptance Table 2.

Change
System suitability solution: 5 µg/mL each of USP Promethazine Hydrochloride RS and USP Promethazine Related Compound B RS from the Standard stock solution and System suitability stock solution, respectively
Standard solution: 5 µg/mL of USP Promethazine Hydrochloride RS from the Standard stock solution
Sensitivity solution: 0.25 µg/mL of USP Promethazine Hydrochloride RS from the Standard solution
to:
System suitability solution: 5 µg/mL each of USP Promethazine Hydrochloride RS and USP Promethazine Related Compound B RS from the Standard stock solution and System suitability stock solution, respectively, in Diluent
Standard solution: 5 µg/mL of USP Promethazine Hydrochloride RS from the Standard stock solution in Diluent
Sensitivity solution: 0.25 µg/mL of USP Promethazine Hydrochloride RS from the Standard solution in Diluent

Change
Where the label states that Seco barbital Sodium is sterile, it meets the requirements for Sterility Tests 〈71〉 and for Bacterial endotoxins under Secobarbital Sodium for Injection. Where the label states that Secobarbital Sodium must be subjected to further processing during the preparation of injectable dosage forms, it meets the requirements for Bacterial endotoxins under Secobarbital Sodium for Injection.
to:
Where the label states that Secobarbital Sodium is sterile, it meets the requirements for Sterility Tests 〈71〉 and the level of bacterial endotoxins is not more than 0.9 USP Endotoxin Units per mg of secobarbital sodium tested per Bacterial Endotoxins Test <85>. Where the label states that Secobarbital Sodium must be subjected to further processing during the preparation of injectable dosage forms, the level of bacterial endotoxins is not more than 0.9 USP Endotoxin Units per mg of secobarbital sodium tested per Bacterial Endotoxins Test <85>.

In Test 1: Change
Buffer stage
Medium: 0.05 M pH 6.8 phosphate buffer (see Reagents, Indicators, and Solutions—Buffer Solutions)
to:
Buffer stage
Medium: 0.05 M pH 6.8 phosphate buffer (see Reagents, Indicators, and Solutions—Buffer Solutions); 900 mL

In Chromatographic system and Procedure: Change
C is the concentration, in mg per mL, of USP Dextromethorphan Hydrobromide RS, on the anhydrous basis, in the Standard preparation;
to:
C is the concentration, in mg per mL, of USP Dextromethorphan Hydrobromide RS in the Standard preparation;