Errata - English

In Leachable Arsenic/Analysis: Change
A 3.0-mL portion of the Sample solution meets the requirements in Arsenic 〈211〉, Procedures, Procedure.
to:
A 3.0-mL portion of the Sample solution meets the requirements in Arsenic 〈211〉, Procedures, Procedure 1.

In Acetic Acid in Peptides/Analysis: Change
C_SPA = concentration of potassium acetate in each of the Standard solutions (mg/mL)
to:
C_SPA = concentration of potassium acetate in each of the Standard solutions (µg/mL)
AND
In Ammonium/Analysis: Change
C_SAC = concentration of ammonium chloride in each of the Standard solutions (mg/mL)
to:
C_SAC = concentration of ammonium chloride in each of the Standard solutions (µg/mL)

Change
Uniformity of Dosage Units 〈905〉
Procedure for content uniformity
to:
Uniformity of Dosage Units 〈905〉: Meets the requirements
Procedure for content uniformity, chewable tablets only
AND
In Uniformity of Dosage Units: Delete
Acceptance criteria: Meet the requirements for chewable tablets

In Dissolution 〈711〉/Test 1/Analysis: Change
Determine the percentage of telmisartan (C₃₃H₃₀N₄O₂) dissolved:
Result = (A_U × C_S × V × 100)/(A_S × D × L)
to:
Calculate the percentage of the labeled amount of telmisartan (C₃₃H₃₀N₄O₂) dissolved:
Result = (A_U/A_S) × C_S × V × D × (1/L) × 100
AND
Change
C_S = concentration of the Standard solution (mg/mL)
to:
C_S = concentration of USP Telmisartan RS in the Standard solution (mg/mL)
AND
In Dissolution 〈711〉/Test 2/Analysis: Change
r_U = peak response from the Sample solution
r_S = peak response from the Standard solution
to:
r_U = peak response of telmisartan from the Sample solution
r_S = peak response of telmisartan from the Standard solution
AND
In Dissolution 〈711〉/Test 3/Analysis: Change
C_S = concentration of the Standard solution (mg/mL)
to:
C_S = concentration of USP Telmisartan RS in the Standard solution (mg/mL)

In System suitability: Change
[Note—The approximate relative retention times for (3S,3′S)-zeaxanthin, (3R,3′S-meso)-zeaxanthin, (3R,3′R)-zeaxanthin, and (3R,3′R,6′R)-lutein are 0.94, 1.00, 1.06, and 1.11, respectively.]
to:
[Note—The approximate relative retention times for (3S,3′S)-zeaxanthin, (3R,3′S)-zeaxanthin, (3R,3′R)-zeaxanthin, and (3R,3′R,6′R)-lutein are 0.94, 1.00, 1.06, and 1.11, respectively.]
AND
In System suitability/Suitability requirements/Resolution: Change
(3R,3′S-meso)-zeaxanthin
to:
(3R,3′S)-zeaxanthin
AND
In Analysis: Change
(3R,3′S-meso)-zeaxanthin
to:
(3R,3′S)-zeaxanthin
AND
In Acceptance criteria: Change
(3R,3′S-meso)-Zeaxanthin
to:
(3R,3′S)-Zeaxanthin

In Analysis: Change
M_r1 = molecular weight of atorvastatin, 558.64
M_r2 = molecular weight of atorvastatin calcium, 1155.34
to:
M_r1 = molecular weight of atorvastatin, 558.65
M_r2 = molecular weight of atorvastatin calcium, 1155.36

In Dissolution 〈711〉/Medium: Change
26.7 g/L of sodium acetate trihydrate in water. Add 133 mL of glacial acetic acid to this solution, and then dilute with water to 10 L; 900 mL.
to:
0.02 M sodium acetate buffer, pH 3.5, prepared as follows. Dissolve 2.67 g of sodium acetate in 100 mL of water. Add 13.3 mL of glacial acetic acid and then dilute with water to 1000 mL; 900 mL.

In USP Reference Standards 〈11〉: Change
USP Rivastigmine Tartrate R-Isomer RS
to:
USP Rivastigmine Tartrate R-Isomer RS
(R)-3-[1-(Dimethylamino)ethyl]phenyl ethylmethylcarbamate, hydrogen tartrate.
C₁₄H₂₂N₂O₂ · C₄H₆O₆ 400.42