Errata - English

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In Table 2, footnote b: Change
(4S,4aR,5S,5aR,6R,12aS)-2-Acetyl-4-(dimethylamino)-4a,5a,6,12a-tetrahydro-3,5,10,12,12a-pentahydroxy-6-methyl-tetracene-1,11-dioxo-2-naphthacenecarboxamide.
to:
(4S,4aR,5S,5aR,6R,12aS)-2-Acetyl-4-(dimethylamino)-3,5,10,12,12a-pentahydroxy-6-methyl-4a,5a,6,12a-tetrahydrotetracene-1,11(4H,5H)-dione.

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In Dissolution 〈711〉/Test for dutasteride/Tier 2/Medium: Change
10 g/L of cetyltrimethylammonium bromide and 750,000 USP units of activity/mg of pepsin, purified in 0.1 N hydrochloric acid; 900 mL
to:
Dissolve 10 g of cetyltrimethylammonium bromide and 1.6 g of pepsin, purified in 1000 mL of 0.1 N hydrochloric acid; 900 mL

In USP Econazole Related Compound C RS: Change
1-(4-Chlorobenzyl)-3-{2-[(4-chlorobenzyl)oxy]-2-(2,4-dichlorophenyl)ethyl}-1H-imidazol-3-ium nitrate (salt).
C₂₅H₂₁Cl₁₄N₃O₄ 569.26
to:
1-(4-Chlorobenzyl)-3-{2-[(4-chlorobenzyl)oxy]-2-(2,4-dichlorophenyl)ethyl}-1H-imidazol-3-ium chloride.
C₂₅H₂₁Cl₅N₂O 542.71

In B.: Change
The retention time of the major peak of the Sample solution exhibits maxima and minima at the same wavelengths as those of the Standard solution, as obtained in the Assay.
to:
The retention time of the major peak of the Sample solution corresponds to that of the Standard solution, as obtained in the Assay.

In Test 1: Change
Buffer stage
Medium: 0.05 M pH 6.8 phosphate buffer (see Reagents, Indicators, and Solutions—Buffer Solutions)
to:
Buffer stage
Medium: 0.05 M pH 6.8 phosphate buffer (see Reagents, Indicators, and Solutions—Buffer Solutions); 900 mL

Change
Proceed as directed in the Identification test under Erythromycin Ethylsuccinate Oral Suspension, beginning with “Prepare a Standard solution.”
to:
Prepare a Standard solution of USP Erythromycin Ethylsuccinate RS in methanol containing about 3 mg per mL. Apply separately 10 µL each of the test solution and the Standard solution to a suitable thin-layer chromatographic plate (see Chromatography 〈621〉) coated with a 0.25-mm layer of chromatographic silica gel mixture, and allow to dry. Place the plate in an unlined chromatographic chamber, and develop the chromatograms in a solvent system consisting of a mixture of methanol and chloroform (85:15) until the solvent front has moved about 9 cm. Remove the plate from the chamber, mark the solvent front, and allow the solvent to evaporate. Spray the plate with a mixture of dehydrated alcohol, p-methoxybenzaldehyde, and sulfuric acid (90:5:5). Heat the plate at 100° for 10 minutes, and examine the chromatograms, in which the erythromycin and succinic acid moieties appear as black-to-purple spots: the R_F values of the principal spots obtained from the test solution correspond to those obtained from the Standard solution.

Change
Constitute Erythromycin Ethylsuccinate for Oral Suspension as directed in the labeling, and proceed as directed in the Assay under Erythromycin Ethylsuccinate Oral Suspension.
to:
Constitute Erythromycin Ethylsuccinate for Oral Suspension as directed in the labeling, and proceed as directed for erythromycin under Antibiotics—Microbial Assays 〈81〉, using an accurately measured volume of the reconstituted suspension, freshly mixed and free from air bubbles, blended for 4 ± 1 minutes in a high-speed glass blender jar with sufficient methanol to give a stock solution containing the equivalent of about 1 mg of erythromycin per mL. Dilute this stock solution quantitatively with Buffer B.3 to obtain a Test Dilution having a concentration assumed to be equal to the median dose level of the Standard.

Change
Buffer, Mobile phase, System suitability solution, Standard solution, Sample solution, and Chromatographic system: Proceed as directed in the Assay.
to:
Buffer, Mobile phase, System suitability solution, Standard solution, Sample solution, and Chromatographic system: Proceed as directed in the Assay, and use 40 µL injection volume for the Sensitivity solution.

In Acceptance criteria/Total impurities: Change
NMT 2.5%. Disregard any peak below 0.05% of the peak area of fluocinolone acetonide from the Standard solution.
to:
NMT 2.5%. Disregard any peak below 0.05% of the peak area of fluocinolone acetonide from the Sample solution.

In Sample solution: Change
Transfer 1.0 g of the Nasal Spray to a 50-mL volumetric flask. Add about 40 mL of Diluent, and sonicate for 10 min until the supernatant is clear. Use the clear supernatant for analysis.
to:
Transfer 1.0 g of the Nasal Spray to a 50-mL volumetric flask. Add about 40 mL of Diluent, and sonicate for 10 min. Dilute with Diluent to volume, and shake. Allow to stand for 10 min until the supernatant is clear. Use the clear supernatant for analysis.

In Dissolution 〈711〉/Medium: Change
26.7 g/L of sodium acetate trihydrate in water. Add 133 mL of glacial acetic acid to this solution, and then dilute with water to 10 L; 900 mL.
to:
0.02 M sodium acetate buffer, pH 3.5, prepared as follows. Dissolve 2.67 g of sodium acetate in 100 mL of water. Add 13.3 mL of glacial acetic acid and then dilute with water to 1000 mL; 900 mL.

In Acetic Acid in Peptides/Analysis: Change
C_SPA = concentration of potassium acetate in each of the Standard solutions (mg/mL)
to:
C_SPA = concentration of potassium acetate in each of the Standard solutions (µg/mL)
AND
In Ammonium/Analysis: Change
C_SAC = concentration of ammonium chloride in each of the Standard solutions (mg/mL)
to:
C_SAC = concentration of ammonium chloride in each of the Standard solutions (µg/mL)

In Analysis: Change
Result = (R_U/R_S) x C_S x V x (D/W_U) x (1/L) x 100
R_U = peak area ratio of ibuprofen to benzophenone from the Sample solution
R_S = peak area ratio of ibuprofen to benzophenone from the Standard solution
C_S = concentration of USP Ibuprofen RS in the Standard solution (mg/mL)
V = volume of Medium, 900 mL
D = density of Oral Suspension (g/mL)
W_U = weight of the portion of Oral Suspension added to the Medium (g)
L = label claim (mg/mL)
to:
Result = (R_U/R_S) x C_S x V x (d/W_U) x D x (1/L) x 100
R_U = peak area ratio of ibuprofen to benzophenone from the Sample solution
R_S = peak area ratio of ibuprofen to benzophenone from the Standard solution
C_S = concentration of USP Ibuprofen RS in the Standard solution (mg/mL)
V = volume of Medium, 900 mL
d = density of Oral Suspension (g/mL)
W_U = weight of the portion of Oral Suspension added to the Medium (g)
D = dilution factor of the Sample solution, 2
L = label claim (mg/mL)

In Organic Impurities, Procedure 2/footnote 4: Change
5-[[3-[[3-[[[3-[[3-[[3,5-Bis-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl](acetylimino)]-2-hydroxypropyl](acetylimino)]-5-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl]carbonyl]amino]-2-hy droxypropyl]oxy]-2-hydroxypropyl](acetylimino)]-N,N'-bis(2,3-dihy droxypropyl)-2,4,6-triiodo-1,3-benzendicarboxamide.
to:
5-[[3-[[3-[[[3-[[3-[[3,5-Bis-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl](acetylamino)]-2-hydroxypropyl](acetylamino)]-5-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl]carbonyl]amino]-2-hydroxypropyl]oxy]-2-hydroxypropyl](acetylamino)]-N,N'-bis(2,3-dihydroxypropyl)-2,4,6-triiodo-1,3-benzendicarboxamide.

In USP Reference Standards 〈11〉/USP Iodixanol Related Compound E RS: Change
5-[[3-[[3-[[(2,3-Dihydroxypropyl)amino]carbonyl]-5- [[amino]carbonyl]-2,4,6-triiodophenyl](acetylimino)]-2-hydroxypropyl]-(acetylimino)]-N,N′-bis(2,3-dihydroxypropyl)-2,4,6-triiodo-1,3-benzenedicarboxamide.
to:
5-{N-[3-(N-{3-Carbamoyl-5-[(2,3-dihydroxypropyl)carbamoyl]-2,4,6-triiodophenyl}acetamido)-2-hydroxypropyl]acetamido}-N¹,N³-bis(2,3-dihydroxypropyl)-2,4,6-triiodoisophthalamide.

In Analysis: Change
r_S = sum of all the peaks except those each of which with an area less than 0.1 times the area of the major peak from the Reference solution
to:
r_T = sum of all the peaks except those each of which with an area less than 0.1 times the area of the major peak from the Reference solution

In Analysis: Change
Result = (r_U/r_S) × C_S × (1/F)
to:
Result = (r_U/r_S) × C_F × (1/F)
AND
Change
C_S = final concentration of USP Isoflurane Related Compound B RS in the Standard solution (%)
to:
C_F = final concentration of USP Isoflurane Related Compound B RS in the Standard solution (%)

In Organic Impurities/Standard solution: Change
isosorbide related compound A
to:
isosorbide mononitrate related compound A
AND
In System suitability/Suitability requirements/Relative standard deviation: Change
isosorbide related compound A,
to:
isosorbide mononitrate related compound A,
AND
In four instances in Analysis: Change
isosorbide related compound A,
to:
isosorbide mononitrate related compound A,
AND
In Table 1: Change
Isosorbide related compound A
to:
Isosorbide mononitrate related compound A

Change
C₄₈H₇₄O₁₄(Component H₂B_1a) 875.09
C₄₇H₇₂O₁₄(Component H₂B_1b) 861.07
Component H₂B_1a:
Avermectin A_1a, 5-O-demethyl-22,23-dihydro-.
(2aE,4E,8E)-(5′S,6S,6′R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-6′-(S)-sec-Butyl-3′,4′,5′,6,6′,7,10,11,14,15,17a,20,20a,20b-tetradecahydro-20,20b-dihydroxy[11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2′-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70161-11-4.
Component H₂B_1b:
Avermectin A_1a, 5-O-demethyl-25-de(1-methylpropyl)-22,23-dihydro-25-(1-methylethyl)-.
(2aE,4E,8E)-(5′S,6S,6′R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-3′,4′,5′,6,6′,7,10,11,-oxospiro[11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2′[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70209-81-3; UNII: 0W28CYI3TU.
to:
C₄₈H₇₄O₁₄(Component H₂B_1a) 875.11
C₄₇H₇₂O₁₄(Component H₂B_1b) 861.08
Component H₂B_1a:
Avermectin A_1a, 5-O-demethyl-22,23-dihydro-.
(2aE,4E,8E)-(5’S,6S,6’R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-6’-(S)-sec-Butyl-3’,4’,5’,6,6’,7,10,11,14,15,17a,20,20a,20b-tetradecahydro-20,20b-dihydroxy-5’,6,8,19-tetramethyl-17-oxospiro [11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2’-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 71827-03-7; UNII: 91Y2202OUW.
Component H₂B_1b:
Avermectin A_1a, 5-O-demethyl-25-de(1-methylpropyl)-22,23-dihydro-25-(1-methylethyl)-.
(2aE,4E,8E)-(5’S,6S,6’R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-3’,4’,5’,6,6’,7,10,11,14,15,17a,20,20a,20b-Tetradecahydro-20,20b-dihydroxy-6’-isopropyl-5’,6,8,19-tetramethyl-17-oxospiro [11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2’-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70209-81-3; UNII: 0W28CYI3TU.

Change
Standard solution: Transfer 2.0 mg/mL of USP Latanoprost RS into a suitable volumetric flask, dissolve in dehydrated alcohol equivalent to 20% of the final volume, and dilute with chromatographic hexane to volume.
Sample solution: Transfer 2.0 mg/mL of Latanoprost into a suitable volumetric flask, dissolve in dehydrated alcohol equivalent to 20% of the final volume, and dilute with chromatographic hexane to volume.
to:
Standard solution: 2.0 mg/mL of USP Latanoprost RS prepared as follows. Transfer USP Latanoprost RS into a suitable volumetric flask, dissolve in dehydrated alcohol equivalent to 20% of the final volume, and dilute with chromatographic hexane to volume.
Sample solution: 2.0 mg/mL of Latanoprost prepared as follows. Transfer Latanoprost into a suitable volumetric flask, dissolve in dehydrated alcohol equivalent to 20% of the final volume, and dilute with chromatographic hexane to volume.