Errata - English

Change
Prepare a test solution containing the equivalent of 4 mg of amoxicillin per mL by adding 0.1 N hydrochloric acid to Amoxicillin for Injectable Suspension. Allow the solution to stand for 5 minutes before use: the solution responds to the Identification test under Amoxicillin Capsules.
to:
Prepare a test solution containing the equivalent of 4 mg of amoxicillin per mL by adding 0.1 N hydrochloric acid to Amoxicillin for Injectable Suspension. Allow the solution to stand for 5 minutes before use. Prepare a Standard solution of USP Amoxicillin RS in 0.1 N hydrochloric acid containing 4 mg per mL. Use within 10 minutes after preparation. Apply separately 5 µL of each solution on a thin-layer chromatographic plate coated with a 0.25-mm layer of chromatographic silica gel mixture (see Chromatography <621>). Place the plate in a suitable chromatographic chamber, and develop the chromatogram in a solvent system consisting of a mixture of methanol, chloroform, water, and pyridine (90:80:30:10). When the solvent front has moved about three-fourths of the length of the plate, remove the plate from the chamber, and dry with warm air for 10 minutes. Locate the spots on the plate by spraying lightly with a solution of ninhydrin in alcohol containing 3 mg per mL, and dry at 110° for 15 minutes: the R_F value of the principal spot obtained from the test solution corresponds to that obtained from the Standard solution.

In Organic Impurities, Procedure 2/footnote 4: Change
5-[[3-[[3-[[[3-[[3-[[3,5-Bis-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl](acetylimino)]-2-hydroxypropyl](acetylimino)]-5-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl]carbonyl]amino]-2-hy droxypropyl]oxy]-2-hydroxypropyl](acetylimino)]-N,N'-bis(2,3-dihy droxypropyl)-2,4,6-triiodo-1,3-benzendicarboxamide.
to:
5-[[3-[[3-[[[3-[[3-[[3,5-Bis-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl](acetylamino)]-2-hydroxypropyl](acetylamino)]-5-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl]carbonyl]amino]-2-hydroxypropyl]oxy]-2-hydroxypropyl](acetylamino)]-N,N'-bis(2,3-dihydroxypropyl)-2,4,6-triiodo-1,3-benzendicarboxamide.

Line 1 of Standard solution A: Change
USP Ganoderic Acid RS
to:
USP Ganoderic Acid A RS
AND
Line 3 of variable definition list in Analysis: Change
r_S = peak area of ganoderic acid in Standard solution A
to:
r_S = peak area of ganoderic acid A in Standard solution A
AND
Line 10 of variable definition list in Analysis: Change
F = relative response factor, with respect to ganoderic acid A (see Table 3)
to:
F = relative response factor, with respect to ganoderic acid A (see Table 2)

Line 2 of USP Almotriptan Related Compound D RS: Change
1-[({3-[2-(Dimethylamino)ethyl]indol-5-yl}methyl)sulfonyl]pyrrolidine N-oxide.
C₁₇H₂₅N₃O₃S 351.46
to:
1-[({3-[2-(Dimethylamino)ethyl]indol-5-yl}methyl)sulfonyl]pyrrolidine N-oxide hydrochloride.
C₁₇H₂₅N₃O₃S · HCl 387.92

Change
Using the Injection as the Test solution, proceed as directed for Color and clarity under Isoproterenol Inhalation Solution.
to:
Standard solution—Transfer 2.0 mL of 0.100 N iodine VS to a 500-mL volumetric flask, dilute with water to volume, and mix.
Procedure—Visually examine a portion of the Injection (Test solution) in a suitable clear glass test tube against a white background: it is not pinkish and it contains no precipitate. If any yellow color is observed in the Test solution, concomitantly determine the absorbances of the Test solution and the Standard solution in 1-cm cells with a suitable spectrophotometer set at 460 nm: the absorbance of the Test solution does not exceed that of the Standard solution.

In Analysis: Change
C_U = nominal concentration of dimenhydrinate in the Sample solution (mg/mL)
to:
C_U = determined concentration of dimenhydrinate in the Sample solution, as obtained in the Assay (mg/mL)

Change
Where tetracycline hydrochloride must be sterile or subjected to further processing during the preparation of injectable dosage forms to ensure acceptable levels of bacterial endotoxins, it is so labeled.
to:
Where Tetracycline Hydrochloride must be sterile or subjected to further processing during the preparation of injectable dosage forms to ensure acceptable levels of bacterial endotoxins, it is so labeled.

In Analysis: Change
C_S = concentration of USP Prazosin Hydrochloride RS in the Standard solution (µg/mL)
C_U = nominal concentration of prazosin in the Sample solution (µg/mL)
M_r1 = molecular weight of prazosin, 383.41
M_r2 = molecular weight of prazosin hydrochloride, 419.86
to:
C_S = concentration of USP Prazosin Hydrochloride RS in the Standard solution (mg/mL)
C_U = nominal concentration of prazosin in the Sample solution (mg/mL)
M_r1 = molecular weight of prazosin, 383.41
M_r2 = molecular weight of prazosin hydrochloride, 419.87

In Content of Proanthocyanidins/Standard stock solution: Change
USP Procyanidin A₂ RS
to:
USP Procyanidin A2 RS
AND
In Content of Proanthocyanidins/Analysis: Change
Use the absorbance recorded for Standard solutions 1–5 to obtain a calibration curve (absorbance vs. concentration, in µg/mL, of procyanidin A₂) and perform a linear regression analysis. Determine the concentration (C), in µg/mL, of total proanthocyanidins as procyanidin A₂ in the Sample solution.
to:
Use the absorbance recorded for Standard solutions 1–5 to obtain a calibration curve (absorbance vs. concentration, in µg/mL, of procyanidin A2) and perform a linear regression analysis. Determine the concentration (C), in µg/mL, of total proanthocyanidins as procyanidin A2 in the Sample solution.
AND
In Content of Proanthocyanidins/Analysis: Change
C = concentration of the Sample solution as procyanidin A₂ from the regression line (µg/mL)
to:
C = concentration of the Sample solution as procyanidin A2 from the regression line (µg/mL)
AND
In Content of Proanthocyanidins/Acceptance criteria: Change
procyanidin A₂
to:
procyanidin A2

This erratum applies to the new USP-NF ONLINE platform only.
Line 1 of Standard stock solution 2: Change
0.1 mg/mL of in Diluent.
to:
0.1 mg/mL of USP Triamterene Related Compound A RS in Diluent.
AND
Line 1 of Standard stock solution 3: Change
0.1 mg/mL of USP Tranylcypromine Related Compound B RS in Diluent.
to:
0.1 mg/mL of USP Triamterene Related Compound B RS in Diluent.

In Heavy Metals, Total Terephthaloyl Moieties, and Ethylene Glycol/Extracting media: Change
50 percent alcohol: Dilute 125 mL of alcohol with water to 238 mL, and mix.
25 percent alcohol: Dilute 125 mL of 50 percent alcohol with water to 250 mL, and mix.
General procedure: [Note— Use an Extracting medium of 50 percent alcohol for PET bottles and 25 percent alcohol for PETG bottles.]
to:
Purified Water: See monograph.
50 percent alcohol: Dilute 125 mL of alcohol with water to 238 mL, and mix.
25 percent alcohol: Dilute 125 mL of 50 percent alcohol with water to 250 mL, and mix.
n-Heptane
General procedure: [Note— Use an Extracting medium of 50 percent alcohol for PET bottles and 25 percent alcohol for PETG bottles.]
AND
In four instances in Heavy Metals, Total Terephthaloyl Moieties, and Ethylene Glycol/Heavy Metals: Change
Extracting media
to:
Purified Water Extracting medium
AND
In Heavy Metals, Total Terephthaloyl Moieties, and Ethylene Glycol/Ethylene Glycol/Test solution: Change
Extracting media
to:
Purified Water Extracting medium
AND
In Heavy Metals, Total Terephthaloyl Moieties, and Ethylene Glycol/Ethylene Glycol/Procedure/paragraph 1: Change
Extracting media extract Extracting medium
to:
Purified Water Extracting medium
AND
In Heavy Metals, Total Terephthaloyl Moieties, and Ethylene Glycol/Ethylene Glycol/Procedure/paragraph 2: Change
using as the blank the solution from the Extracting media: the absorbance of the solution
to:
using Purified Water Extracting medium as the blank: the absorbance of the solution

In USP Mirtazapine Resolution Mixture RS: Change
Impurity D: 1,2,3,4,10,14b-Hexahydropyrazino[2,1-a]pyrido[2,3-c][2]benzazepine.
to:
Impurity D: [Note–This impurity may be available either as the free base form or as the hydrochloride salt form.] 1,2,3,4,10,14b-Hexahydropyrazino[2,1-a]pyrido[2,3-c][2]benzazepine or 1,2,3,4,10,14b-Hexahydropyrazino[2,1-a]pyrido[2,3-c][2]benzazepine hydrochloride.

Change
USP Ondansetron RS
USP Ondansetron Related Compound C RS
1,2,3,9-Tetrahydro-9-methyl-4H-carbazol-4-one.
USP Ondansetron Related Compound D RS
1,2,3,9-Tetrahydro-9-methyl-3-methylene-4H-carbazol-4-one.
to:
USP Ondansetron RS
USP Ondansetron Related Compound A RS
3-[(Dimethylamino)methyl]-9-methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one hydrochloride.
USP Ondansetron Related Compound C RS
9-Methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one.
USP Ondansetron Related Compound D RS
9-Methyl-3-methylene-1,2,3,9-tetrahydro-4H-carbazol-4-one.

Change
USP Ondansetron Related Compound A RS
3-[(Dimethylamino)methyl]-1,2,3,9-tetrahydro-9-methyl-4H-carbazol-4-one hydrochloride.
USP Ondansetron Related Compound C RS
1,2,3,9-Tetrahydro-9-methyl-4H-carbazol-4-one.
USP Ondansetron Related Compound D RS
1,2,3,9-Tetrahydro-9-methyl-3-methylene-4H-carbazol-4-one.
to:
USP Ondansetron Related Compound A RS
3-[(Dimethylamino)methyl]-9-methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one hydrochloride.
USP Ondansetron Related Compound C RS
9-Methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one.
USP Ondansetron Related Compound D RS
9-Methyl-3-methylene-1,2,3,9-tetrahydro-4H-carbazol-4-one.

Change
C₄₈H₇₄O₁₄(Component H₂B_1a) 875.09
C₄₇H₇₂O₁₄(Component H₂B_1b) 861.07
Component H₂B_1a:
Avermectin A_1a, 5-O-demethyl-22,23-dihydro-.
(2aE,4E,8E)-(5′S,6S,6′R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-6′-(S)-sec-Butyl-3′,4′,5′,6,6′,7,10,11,14,15,17a,20,20a,20b-tetradecahydro-20,20b-dihydroxy[11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2′-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70161-11-4.
Component H₂B_1b:
Avermectin A_1a, 5-O-demethyl-25-de(1-methylpropyl)-22,23-dihydro-25-(1-methylethyl)-.
(2aE,4E,8E)-(5′S,6S,6′R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-3′,4′,5′,6,6′,7,10,11,-oxospiro[11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2′[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70209-81-3; UNII: 0W28CYI3TU.
to:
C₄₈H₇₄O₁₄(Component H₂B_1a) 875.11
C₄₇H₇₂O₁₄(Component H₂B_1b) 861.08
Component H₂B_1a:
Avermectin A_1a, 5-O-demethyl-22,23-dihydro-.
(2aE,4E,8E)-(5’S,6S,6’R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-6’-(S)-sec-Butyl-3’,4’,5’,6,6’,7,10,11,14,15,17a,20,20a,20b-tetradecahydro-20,20b-dihydroxy-5’,6,8,19-tetramethyl-17-oxospiro [11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2’-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 71827-03-7; UNII: 91Y2202OUW.
Component H₂B_1b:
Avermectin A_1a, 5-O-demethyl-25-de(1-methylpropyl)-22,23-dihydro-25-(1-methylethyl)-.
(2aE,4E,8E)-(5’S,6S,6’R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-3’,4’,5’,6,6’,7,10,11,14,15,17a,20,20a,20b-Tetradecahydro-20,20b-dihydroxy-6’-isopropyl-5’,6,8,19-tetramethyl-17-oxospiro [11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2’-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70209-81-3; UNII: 0W28CYI3TU.

In Solution A: Change
0.15 N hydrochloric acid in water prepared as follows. Transfer 150 mL of hydrochloric acid to a 500-mL volumetric flask, dilute with water to volume, and mix well.
to:
0.15 N hydrochloric acid in water prepared as follows. Transfer 150 mL of 0.5 N hydrochloric acid VS to a 500-mL volumetric flask, dilute with water to volume, and mix well.

Change
The spectrum obtained from the Sample solution shows IR maxima in the regions of 3500–3200, 2950–2890, 1653–1633, and 1070–1000 cm^–1.
to:
The spectrum obtained from the sample preparation shows IR maxima in the regions of 3500–3200, 2950–2890, 1653–1633, and 1070–1000 cm^–1.

In Release Liner Peel Test: Change
The product fails the test if the mean peel force is outside the acceptable range determined during product development.
to:
The product fails the test if the overall mean peel force is outside the acceptable range determined during product development.

In Organic Impurities/Table 3/footnote c: Change
2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-2-hydroxypropyl methyl-L-valinate hydrochloride.
to:
3-[(2-Amino-6-oxo-1,6-dihydropurin-9-yl)methoxy]-2-hydroxypropyl L-valinate hydrochloride.

Line 1 of Acceptance criteria: Change
The Sample may turn hazy, but it remains colorless, or shows a slight pink or yellow color, and the Sample does not become darker than the Standard solution.
to:
The oil portion of the Sample may turn hazy, but it remains colorless or shows a slight pink or yellow color, and the acid portion of the Sample does not become darker than the Standard solution.

This erratum applies to the Revision Bulletin posted on www.uspnf.com only.
In System suitability: Add
[Note—The relative retention times for oxybutynin and oxybutynin related compound A are about 1.0 and 1.6, respectively.]

In USP Galantamine Hydrobromide Related Compounds Mixture RS: Change
Anhydrogalantamine;
(4aS,8aS)-3-Methoxy-11-methyl-9,10,11,12-tetrahydro-4aH-benzo[2,3]benzofuro[4,3-cd]azepine.
C₁₇H₁₉NO₂
to:
Anhydrogalantamine;
(4aS,8aS)-3-Methoxy-11-methyl-9,10,11,12-tetrahydro-4aH-benzo[2,3]benzofuro[4,3-cd]azepine.
C₁₇H₁₉NO₂ 269.34

In USP Ondansetron Related Compound A RS: Change
3-[(Dimethylamino)methyl]-1,2,3,9-tetrahydro-9-methyl-4H-carbazol-4-one hydrochloride.
to:
3-[(Dimethylamino)methyl]-9-methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one hydrochloride.
AND
In USP Ondansetron Related Compound C RS: Change
1,2,3,9-Tetrahydro-9-methyl-4H-carbazol-4-one.
to:
9-Methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one.
AND
In USP Ondansetron Related Compound D RS: Change
1,2,3,9-Tetrahydro-9-methyl-3-methylene-4H-carbazol-4-one.
to:
9-Methyl-3-methylene-1,2,3,9-tetrahydro-4H-carbazol-4-one.

In footnote 2: Change
9-{(E)-4-[(2R,3aS,6S,7S,8aRS)-2-{(1RS,2S,3S)-1,3-Dihydroxy-2-methylbutyl}-7-hydroxyhexahydro-2H-furo[3,2-c]pyran-6-yl]-3-methylbut-2-enoyloxy}nonanoic acid.
to:
9-{(E)-4-[(2R,3aS,6S,7S)-2-{(1RS,2S,3S)-1,3-Dihydroxy-2-methylbutyl}-7-hydroxyhexahydro-2H-furo[3,2-c]pyran-6-yl]-3-methylbut-2-enoyloxy}nonanoic acid.

Change
Proceed with Injection as directed in the Assay for lidocaine hydrochloride under Lidocaine and Epinephrine Injection.
to:
Proceed with Injection as directed in the Assay for lidocaine hydrochloride under Lidocaine Hydrochloride and Epinephrine Injection.