Errata - English

Change
The retention time of the major peak of the Sample solution corresponds to that of the Sample solution, as obtained in the Assay.
to:
The retention time of the major peak of the Sample solution corresponds to that of the Standard solution, as obtained in the Assay.

Change
USP Ondansetron Related Compound A RS
3-[(Dimethylamino)methyl]-1,2,3,9-tetrahydro-9-methyl-4H-carbazol-4-one hydrochloride.
USP Ondansetron Related Compound C RS
1,2,3,9-Tetrahydro-9-methyl-4H-carbazol-4-one.
USP Ondansetron Related Compound D RS
1,2,3,9-Tetrahydro-9-methyl-3-methylene-4H-carbazol-4-one.
to:
USP Ondansetron Related Compound A RS
3-[(Dimethylamino)methyl]-9-methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one hydrochloride.
USP Ondansetron Related Compound C RS
9-Methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one.
USP Ondansetron Related Compound D RS
9-Methyl-3-methylene-1,2,3,9-tetrahydro-4H-carbazol-4-one.

In Release Liner Peel Test: Change
The product fails the test if the mean peel force is outside the acceptable range determined during product development.
to:
The product fails the test if the overall mean peel force is outside the acceptable range determined during product development.

In Mobile phase and Chromatographic system: Change
Proceed as directed in the Assay under Triazolam.
to:
Proceed as directed in the Assay.
AND
In Procedure: Change
Proceed as directed for Procedure in the Assay under Triazolam.
to:
Proceed as directed in the Assay.

Change
USP Ondansetron RS
USP Ondansetron Related Compound C RS
1,2,3,9-Tetrahydro-9-methyl-4H-carbazol-4-one.
USP Ondansetron Related Compound D RS
1,2,3,9-Tetrahydro-9-methyl-3-methylene-4H-carbazol-4-one.
to:
USP Ondansetron RS
USP Ondansetron Related Compound A RS
3-[(Dimethylamino)methyl]-9-methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one hydrochloride.
USP Ondansetron Related Compound C RS
9-Methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one.
USP Ondansetron Related Compound D RS
9-Methyl-3-methylene-1,2,3,9-tetrahydro-4H-carbazol-4-one.

In USP Clomiphene Related Compound A RS: Change
(E,Z)-2-[4-(1,2-Diphenylethyl)phenoxy]-N,N-diethylethanamine hydrochloride.
to:
(E,Z)-2-[4-(1,2-Diphenylvinyl)phenoxy]-N,N-diethylethanamine hydrochloride.
Also known as (E,Z)-2-[4-(1,2-Diphenylethenyl)phenoxy]-N,N-diethylethanamine hydrochloride.

Change
C₄₈H₇₄O₁₄(Component H₂B_1a) 875.09
C₄₇H₇₂O₁₄(Component H₂B_1b) 861.07
Component H₂B_1a:
Avermectin A_1a, 5-O-demethyl-22,23-dihydro-.
(2aE,4E,8E)-(5′S,6S,6′R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-6′-(S)-sec-Butyl-3′,4′,5′,6,6′,7,10,11,14,15,17a,20,20a,20b-tetradecahydro-20,20b-dihydroxy[11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2′-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70161-11-4.
Component H₂B_1b:
Avermectin A_1a, 5-O-demethyl-25-de(1-methylpropyl)-22,23-dihydro-25-(1-methylethyl)-.
(2aE,4E,8E)-(5′S,6S,6′R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-3′,4′,5′,6,6′,7,10,11,-oxospiro[11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2′[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70209-81-3; UNII: 0W28CYI3TU.
to:
C₄₈H₇₄O₁₄(Component H₂B_1a) 875.11
C₄₇H₇₂O₁₄(Component H₂B_1b) 861.08
Component H₂B_1a:
Avermectin A_1a, 5-O-demethyl-22,23-dihydro-.
(2aE,4E,8E)-(5’S,6S,6’R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-6’-(S)-sec-Butyl-3’,4’,5’,6,6’,7,10,11,14,15,17a,20,20a,20b-tetradecahydro-20,20b-dihydroxy-5’,6,8,19-tetramethyl-17-oxospiro [11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2’-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 71827-03-7; UNII: 91Y2202OUW.
Component H₂B_1b:
Avermectin A_1a, 5-O-demethyl-25-de(1-methylpropyl)-22,23-dihydro-25-(1-methylethyl)-.
(2aE,4E,8E)-(5’S,6S,6’R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-3’,4’,5’,6,6’,7,10,11,14,15,17a,20,20a,20b-Tetradecahydro-20,20b-dihydroxy-6’-isopropyl-5’,6,8,19-tetramethyl-17-oxospiro [11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2’-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70209-81-3; UNII: 0W28CYI3TU.

In USP Fexofenadine Related Compound A RS: Change
Benzeneacetic acid, 4-[1-oxy-4-[4-(hydroxydiphenylmethyl)-1-piperidinyl]butyl]-α,α-dimethyl.
to:
2-(4-{4-[4-(Hydroxydiphenylmethyl)piperidin-1-yl]butanoyl}phenyl)-2-methylpropanoic acid;
Also known as Benzeneacetic acid, 4-[1-oxy-4-[4-(hydroxydiphenylmethyl)-1-piperidinyl]butyl]-α,α-dimethyl.

In Solution A: Change
0.15 N hydrochloric acid in water prepared as follows. Transfer 150 mL of hydrochloric acid to a 500-mL volumetric flask, dilute with water to volume, and mix well.
to:
0.15 N hydrochloric acid in water prepared as follows. Transfer 150 mL of 0.5 N hydrochloric acid VS to a 500-mL volumetric flask, dilute with water to volume, and mix well.

Change
The spectrum obtained from the Sample solution shows IR maxima in the regions of 3500–3200, 2950–2890, 1653–1633, and 1070–1000 cm^–1.
to:
The spectrum obtained from the sample preparation shows IR maxima in the regions of 3500–3200, 2950–2890, 1653–1633, and 1070–1000 cm^–1.

In Procedure: Change
694.83/676.83)(250)C_A(r_U/r_S)
in which 694.83 and 676.83 are the molecular weights of atropine sulfate monohydrate and anhydrous atropine sulfate, respectively;
to:
(694.84/676.82)(250)C_A(r_U/r_S)
in which 694.84 and 676.82 are the molecular weights of atropine sulfate monohydrate and anhydrous atropine sulfate, respectively;

In Organic Impurities/Table 3/footnote c: Change
2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-2-hydroxypropyl methyl-L-valinate hydrochloride.
to:
3-[(2-Amino-6-oxo-1,6-dihydropurin-9-yl)methoxy]-2-hydroxypropyl L-valinate hydrochloride.

In Labeling: Change
The label states the Latin binomial(s) of one or several Salix species included in the article.
to:
The label states the Latin binomial(s) of one or several Salix species included in the article. Dosage forms prepared with this article should bear the following statement: Not for use in children, women who are pregnant or nursing, or by persons with known sensitivity to aspirin.
AND
In USP Reference Standards <11>: Delete
(This monograph is postponed indefinitely.)

In USP Ondansetron Related Compound A RS: Change
3-[(Dimethylamino)methyl]-1,2,3,9-tetrahydro-9-methyl-4H-carbazol-4-one hydrochloride.
to:
3-[(Dimethylamino)methyl]-9-methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one hydrochloride.
AND
In USP Ondansetron Related Compound C RS: Change
1,2,3,9-Tetrahydro-9-methyl-4H-carbazol-4-one.
to:
9-Methyl-1,2,3,9-tetrahydro-4H-carbazol-4-one.
AND
In USP Ondansetron Related Compound D RS: Change
1,2,3,9-Tetrahydro-9-methyl-3-methylene-4H-carbazol-4-one.
to:
9-Methyl-3-methylene-1,2,3,9-tetrahydro-4H-carbazol-4-one.

In USP Bendamustine Related Compound B RS: Change
4-(1-Methyl-5-morpholino-1H-benzimidazol-2-yl)butanoic acid.
C₁₆H₂₁N₃O₃ 303.36
to:
4-(1-Methyl-5-morpholino-1H-benzimidazol-2-yl)butanoic acid hydrochloride.
C₁₆H₂₁N₃O₃ · xHCl

Change
Weigh and powder a quantity of the Tablets, equivalent to about 250 mg of sotalol hydrochloride, and transfer to a 50-mL volumetric flask. Add 25 mL of methanol, and shake for 10 minutes. Dilute with methanol to volume, mix, and filter: the filtrate so obtained meets the requirements for Identification test B under Sotalol Hydrochloride.
to:
Thin-Layer Chromatographic Identification Test <201>—
Test solution—Weigh and powder a quantity of the Tablets, equivalent to about 250 mg of sotalol hydrochloride, and transfer to a 50-mL volumetric flask. Add 25 mL of methanol, and shake for 10 minutes. Dilute with methanol to volume, mix, and filter. Use the filtrate.
Developing solvent system: a mixture of chloroform and methanol (70:30).
Procedure—Proceed as directed in the chapter, except to place two 25-mL beakers, each containing about 10 mL of ammonium hydroxide, on the bottom of the chromatographic chamber that is lined with filter paper and contains the Developing solvent system, allow to equilibrate for 15 minutes, then place the plate in the chamber, and develop the chromatograms until the solvent front has moved about two-thirds of the length of the plate: meets the requirements.

In Procedure/System suitability/Suitability requirements: Change
Resolution: NLT 3 between telmisartan and telmisartan related compound A
Tailing factor: NMT 2.0 for the telmisartan peak
Capacity factor: NLT 1.5
Relative standard deviation: NMT 2.0%
to:
Resolution: NLT 3 between telmisartan and telmisartan related compound A
Tailing factor: NMT 2.0 for telmisartan
Relative standard deviation: NMT 2.0% for telmisartan

Change
Mix a quantity of Oral Suspension, equivalent to about 200 mg of mebendazole, with 20 mL of a mixture of chloroform and 96 percent formic acid (19:1). Proceed as directed for Identification under Mebendazole Tablets, beginning with “Warm the suspension on a water bath for a few minutes.” The specified result is obtained.
to:
Mix a quantity of Oral Suspension, equivalent to about 200 mg of mebendazole, with 20 mL of a mixture of chloroform and 96 percent formic acid (19:1). Warm the suspension on a water bath for a few minutes, cool, and filter through a medium-porosity, sintered-glass filter. Apply 10 μL of this solution and 10 μL of a Standard solution of USP Mebendazole RS in a mixture of chloroform and 96 percent formic acid (19:1) containing 10 mg per mL to a suitable thin-layer chromatographic plate (see Chromatography <621>) coated with a 0.25-mm layer of chromatographic silica gel mixture. Allow the spots to dry, and develop the chromatogram in a solvent system consisting of a mixture of chloroform, methanol, and 96 percent formic acid (90:5:5) until the solvent front has moved about three-fourths of the length of the plate. Remove the plate from the developing chamber, mark the solvent front, allow the solvent to evaporate, and examine the plate under short-wavelength UV light: the R_F value of the principal spot obtained from the Test solution corresponds to that obtained from the Standard solution.

In USP Levalbuterol Related Compound D RS: Change
5-{2-[(1,1-Dimethylethyl)amino]-1-hydroxyethyl}-2-hydroxy-benzaldehyde.
C₁₃H₁₉NO₃ 237.29
^▲[NOTE—This may be available as the sulfate salt (2:1).]_{▲ (USP 1-May-2019)}
to:
5-[2-(tert-Butylamino)-1-hydroxyethyl]-2-hydroxybenzaldehyde sulfate (2:1) (salt);
Also known as 5-[2-{(1,1-Dimethylethyl)amino}-1-hydroxyethyl]-2-hydroxy-benzaldehyde sulfate (2:1).
(C₁₃H₁₉NO₃)₂ · H₂SO₄ 572.67

In footnote 2: Change
9-{(E)-4-[(2R,3aS,6S,7S,8aRS)-2-{(1RS,2S,3S)-1,3-Dihydroxy-2-methylbutyl}-7-hydroxyhexahydro-2H-furo[3,2-c]pyran-6-yl]-3-methylbut-2-enoyloxy}nonanoic acid.
to:
9-{(E)-4-[(2R,3aS,6S,7S)-2-{(1RS,2S,3S)-1,3-Dihydroxy-2-methylbutyl}-7-hydroxyhexahydro-2H-furo[3,2-c]pyran-6-yl]-3-methylbut-2-enoyloxy}nonanoic acid.

In Standard stock solution: Change
of USP Insulin RS of the appropriate species
to:
of the USP Insulin Reference Standard of the appropriate species
AND
In Sample stock solution: Change
of USP Insulin RS of the appropriate species.
to:
of the USP Insulin Reference Standard of the appropriate species.

Change
Proceed with Injection as directed in the Assay for lidocaine hydrochloride under Lidocaine and Epinephrine Injection.
to:
Proceed with Injection as directed in the Assay for lidocaine hydrochloride under Lidocaine Hydrochloride and Epinephrine Injection.

Change
Prepare this solution by one of the following procedures:
to:
Prepare this solution by one of the following procedures. Apply the Test for sensitivity to confirm suitability for freshly or previously prepared solutions or commercially bought solutions.
AND
In Storage: Delete
Use the Test for sensitivity to confirm suitability for use.
AND
In Procedure with No Preservative: Delete
Apply the Test for sensitivity to confirm suitability for freshly or previously prepared solutions.
AND
In Test for sensitivity: Delete
Use the Test for sensitivity to confirm suitability for use.
AND
In Procedure with Salicylic Acid as Preservative: Change
Mix 1 g of soluble starch with 50 mL of cold water
to:
Mix 1 g of soluble starch with 5 mL of cold water

Change
Absence of Specified Microorganisms <2022>, Test Procedures, Test for Absence of Salmonella Species and Absence of Specified Microorganisms <2022>, Test Procedures, Test for Absence of Salmonella Species:
to:
Absence of Specified Microorganisms <2022>, Test Procedures, Test for Absence of Salmonella Species and Test for Absence of Escherichia coli:

In USP Reference Standards 〈11〉/USP Iodixanol Related Compound E RS: Change
5-[[3-[[3-[[(2,3-Dihydroxypropyl)amino]carbonyl]-5- [[amino]carbonyl]-2,4,6-triiodophenyl](acetylimino)]-2-hydroxypropyl]-(acetylimino)]-N,N′-bis(2,3-dihydroxypropyl)-2,4,6-triiodo-1,3-benzenedicarboxamide.
to:
5-{N-[3-(N-{3-Carbamoyl-5-[(2,3-dihydroxypropyl)carbamoyl]-2,4,6-triiodophenyl}acetamido)-2-hydroxypropyl]acetamido}-N¹,N³-bis(2,3-dihydroxypropyl)-2,4,6-triiodoisophthalamide.